Panel Mounting Instructions

For Both Wall and Ceiling Panels - IHP160, 320S, 320, 480, 640, 900 Models

IHP's heating panels can be mounted on either on walls or ceilings using a low profile,  TV style mounting bracket.  The bracket provides a strong, secure mount which is also very easy to install.

Odoo image and text block

Step 1 - Contents, Remove of the mounting bracket

The heating panel is supplied with the  ceiling / wall mounting bracket attached to the back of the panel together with mounting screws and plugs and a spirit level.  To remove the bracket loosen the long locking screws then lift the bracket.  Note how the bracket clips into place.

Odoo image and text block

Step 2 - Marking Drills Holes

Using the mounting bracket as a template, mark 4 drill holes for the mounting plugs.  For a ceiling mount, ensure that the template is parallel to the walls ie the drill holes are the same distance to the wall. For wall mounting, spirit level can be used to ensure the panel is level.

Odoo image and text block

Step 3 - Drill the Holes, Insert the Plugs

Using the mounting bracket as a template, mark 4 drill holes for the mounting plugs.  For a ceiling mount, ensure that the template is parallel to the walls ie the drill holes are the same distance to the wall. For wall mounting, spirit level can be used to ensure the panel is level. Once the holes are drilled, insert drill plugs.  Depending on the type of ceiling, the purchase of longer mounting screws may be required.

Odoo image and text block

Step 4 - Fix Mounting Bracket In Place

Next position the mounting bracket in place using the mounting screws.  Note: A hole for the wiring is not shown.

Odoo image and text block

Step 5 - Fix the Panel to the Bracket        

Next clip the back bracket on the panel into the rear of the mounting bracket. 

Odoo image and text block

Step 6 - Lock the Panel In Place   

Next, raise the front of the panel until the locking screws are above the bracket.  Tighten both locking screws until the panel is locked in place.  Mounting is now complete.    

The plastic protective film can now be removed.