Infrared Heater Panel+ (mountable)
High performance far infrared heaters, which look superb when mounted on high ceilings.
The IHP Panel Plus range is specifically designed for high ceilings and outdoor settings. These panels reach a surface temperature of approximately 120 degree which is about 30 degrees higher than our standard panels. Unlike panels that utilize graphite heating elements, the IHP stainless steel and mica heating element can easily handle these elevated temperatures. As a result, IHP proudly maintains its standard ten-year warranty on these products.
| Part No. | Power | Size (L x W x H) | Weight | Heating Area* |
|---|---|---|---|---|
| IHP450 | 450W | 1195 x 295 x 25mm | 2.6kg | 8m2 |
| IHP900 | 900W | 1195 x 595 x 25mm | 5.1kg | 17m2 |
*Heating area is dependent upon a variety of factors eg insulation, usage, building construction etc. Please contact one of heating specialists for guidance.
| Property | Value |
|---|---|
| Colour | White |
| Element | Resistor - Heavy Duty Stainless Steel in a Ceramic (mica) Substrate |
| Usage | Low intensity heating panel for indoor heating. Can be mounted flush with a wall or ceiling without fear of over-heating. Ceiling model fits directly into standard grid suspended ceiling. Not suitable for outside heating or in large open spaces. |
| Temperature | 90°C (average) 120°C for 900W panel. |
| Fuse Rating (Recd.) | 3 Amp for 160 to 480W, 5 Amp for 640 & 900W models |
| IP Rating | IP54 |
| Protection | Bimetallic temperature trip |
| Certifications & Compliance | LVD EN60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 EN60335-2-30:2003 EN61000-6-3:2007 + A1:2011 EN61000-3-2:2006 + A1:2009 + A2:2009 EN61000-3-3:2008 EN61000-6-1:2007 RoHS Directive 2011/65/EU EC Directive 2012/19/EU on WEEE Commission Regulation (EU) 2015/1188 Lot 20 and is exempt under Article 1 Section (g) by definition under Article 2 Section (16) |
| Warranty | 10 years |
| Manufactured By | Infrared Heating Products Ltd in the UK |

