,%20White)?unique=ef7242a)
Suspended Ceiling Tile Heater
Infrared panel heaters that fit seamlessly into a suspended ceiling.
|
Incorporating heating into suspended ceilings is the ideal solution for commercial offices. Installation is easy, allowing heat to be delivered exactly where it is needed. |
The 320W Square panel and 640W ceiling tile heaters were specifically designed to fit seamlessly into 600mm x 600mm suspended ceiling systems and meet UK electrical wiring and building regulations. They have also been designed to allow full insulation over the rear of the panel thereby improving performance.
Available as either single or double grids.
Data Sheet:
| Code | Power | Size (L x W x H) | Weight | Heating Area |
|---|---|---|---|---|
| IHP320Sc | 320W | 595 x 595 x 25mm | 2.6kg | 6m2 |
| IHP640c | 640W | 1195 x 595 x 25mm | 5.1kg | 12m2 |
| Property | Value |
|---|---|
| Usage | Low intensity heating panel for indoor heating. Can be mounted flush with a wall or ceiling without fear of over-heating. Ceiling model fits directly into standard grid suspended ceiling. Not suitable for outside heating or in large open spaces. |
| Temperature | 90°C (average) 120°C for 900W panel. |
| Element | Resistor - Heavy Duty Stainless Steel in a Ceramic (mica) Substrate |
| Mounting | Suspended Ceiling |
| Protection | Bimetallic temperature trip |
| Fuse Rating (Recd.) | 3 Amp for 160 to 480W, 5 Amp for 640 & 900W models |
| IP Rating | IP54 |
| Warranty | 10 years |
| Manufactured By | Infrared Heating Products Ltd in the UK |
| Certifications & Compliance | LVD EN60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 EN60335-2-30:2003 EN61000-6-3:2007 + A1:2011 EN61000-3-2:2006 + A1:2009 + A2:2009 EN61000-3-3:2008 EN61000-6-1:2007 BS EN 13964:2004 European Standard for Suspended Ceilings RoHS Directive 2011/65/EU EC Directive 2012/19/EU on WEEE Commission Regulation (EU) 2015/1188 Lot 20 and is exempt under Article 1 Section (g) by denition under Article 2 Section (16) |
